Fly Electric!

Fibreglass Moulding

Fly Baby cowl - finished product. After first drilling a number of holes to hold the mould together, open it up and remove the plug. Sand away any blemishes with fine water-paper. Give the mould the 'wax treatment' described earlier. The finished cowl in this photo has a layer of gelcoat (pigmented white) followed by one layer of 8 or 10oz woven cloth (the resin was also pigmented white). Here it has been partially released from the mould.

1st fibreglass cowl and separated mould

Back
Click on the links below for other pages.

Home ¦ Art of the Possible ¦ Absence of Matter ¦ Links ¦ Updates ¦ Email
SITE MAP